|
|
| |
CHM.......Composites
Syntex
|
 |
|
|
Products
supplied by CHM Composites under the syntex brand range
from light weight surfacing veils to heavier semi structural
reinforcements made from a wide range of synthetic fibres.
Veils and mats are produced in base weights from 8g/m2 to
350g/m2 and can be supplied in full or slit widths. |
 |
 |
|
| The
discontinuous nature of the fibres means the veils and mats
are by necessity, chemically bonded. Binders are specially
selected to be compatible with all major resin systems and
to be either soluble or insoluble depending on the requirements
of the application or process.
Our products are suitable for most
processing techniques including hand lay-up, pultrusion,
filament/mandrel winding, prepreg lamination/autoclave,
RTM, vacuum assisted resin injection processes etc.
The wet laid process
allows dissimiler fibres to be intimately blended to give
a tailored product which exhibits the optimum properties
of each fibre type. For instance, blends of carbon with
non conductive fibres gives a balance of conductivity and
cost for surface static dissipation, blends of aramid with
thermoplastic fibres can impart high abrasion resistance
with high elongation in the finished component.
Carbon
Fibre Veils and Mats
| Fibre type |
PAN based carbon fibre |
| Fibre length |
6 – 25mm |
| Fibre orientation |
Random or partially
aligned |
| Base weight |
6 – 150g/m2 |
| Binder types |
Soluble or insoluble
in standard resin systems |
Aramid/PBO
Veils and Mats
| Fibre type |
Kevlar/Twaron/Zylon |
| Fibre length |
12mm |
| Fibre orientation |
Random or partially
aligned |
| Base weight |
10 – 100g/m2 |
| Binder types |
Soluble or insoluble
in standard resin systems |
Conductive Veils and Mats
| Fibre type |
PAN based carbon fibre,
nickel and copper coated carbon fibre, silicon carbide,
stainless steel |
| Fibre length |
6 - 25mm |
| Fibre orientation |
Random or partially
aligned |
| Base weight |
6 – 1000g/m2 |
| Binder types |
Soluble or insoluble
in standard resin systems |
Veils and Mats from Blended
Fibres
| Fibre type |
Any combination of
glass, polyester, PAN based carbon fibre, nickel and
copper coated carbon fibre, quartz, silicon carbide,
stainless steel |
| Fibre length |
6 - 25mm |
| Fibre orientation |
Random or partially
aligned |
| Base weight |
6 – 150g/m2 |
| Binder types |
Soluble or insoluble
in standard resin systems |
|
| |
|
|
|
Tel: 01524 406088 ::
info@chmaterials.com Technical Fibre Products - Conductive tissue, Conductive veil, Conductive mat, Kevlar, Wet laid, Nickel coated graphite, Nickel coated carbon, Polyester tissue, Glass tissue, Surfacing veil, Lossy veil, Radar absorbent, PBO |
