CHM Butyl tape SM100 can offer a preformed high performance polyisobutylene (PIB) based sealing tape available in single strand or multi-lane rolls. This product has a multitude of applications where joints need to be formed to seal against air and water ingress. The product is cost effective, non toxic and requires no tools to apply.

We offer a similar product SM200 as above but with enhanced adhesive characteristics for more demanding applications where there are requirements for a degree of bonding.

APPLICATIONS:

Roofing and Cladding industry where it creates an excellent seal in situations such as side and end lap joints and the bead section is particularly recommended for large corrugated end lap sheet profiles.

Heating and Ventilation market has found this product to be preferable to other methods of sealing flanges on ducting due to its ease of use and solvent free formulation.

Aerospace vacuum forming processes as a disposable sealant & adhesive where it can be subjected to temperatures up to 150 deg.C.

Automotive uses include sealing around the frames of sun roofs.

Greenhouse manufacturers include this product to seal between the glazing and framework.

Caravan manufacturers have many applications such as sealing between mouldings and the outer skin, lap joints on the body work and other areas where fittings are attached piercing the outer skin.

Fire Protection is enhanced by use of an intumescent version.

Damp Proofing where the higher adhesion product is used forbonding & sealing applications such as cavity trays & polythene membranes.

FEATURES & BENEFITS:

• Self wound roll presentation
• Solventless formulation
• Instand seal
• Direct controlover quantity of sealant used in the joint
• Environmentally friendly
• Ease of use
• Good Adhesion on both faces to most building materials
• High pumping resistance

SM100 should be applied to surfaces at a temperature range of between +4 and +30 deg.C. For best performance the surfaces should be clean, dry, and grease free. The product should be unwound and lightly pressed into position leaving the release paper in place. On forming the joint the release paper is removed and the closing surface pushed firmly in place, pressure applied along the length of the joint and mechanically fixed if necessary.

GENERAL DESCRIPTION:

SM100 is a preformed high performance polyisobutylene (PIB) based sealing tape available in single strand or multi-lane rolls. This product has been developed for the tunnelling industry for applications where joints need to be formed to seal against air and water ingress. The product is cost effective, non toxic and requires no tools to apply.